Equipment consisting of a mobile fall arrester with self-locking, integral with its flexible anchorage line (rope, cable…). An energy reducer (absorber) can be built-in in the equipment.

Equipment consisting of a mobile fall arrester with self-locking, integral with its rigid anchorage line (rail, cable…). An energy reducer can be built-in on the equipment.

Body securing device intended to stop falls. The full body harness can be made of straps, buckles and other elements; set and adjusted in a right way on the body of an individual to secure him during a fall and afterwards.

Component of a fall arrest equipment, which guarantees the stop of a fall from a height in safety by reducing the impact of the shock.

WARNING: If we associate a lanyard energy absorber, the total length of the entire device must not exceed 2 m.

Fall arrester with self-locking device and a self-retractable system for the lanyard. An energy reducer (absorber) can be built-in in the equipment.

Beschrijft de artikelen en de situaties voor individuele bescherming tegen valrisico’s.

REACH and PPE statement document  ​ 

SCIP information

Connection element or equipment component. A connector can be karabiner or a snap hook.
Class A: Anchorage connector, automatic lock used as the component and designed to be connected directly to a specific type of anchorage.
Class B: Primary connector with automatic lock used as the component.
Class M: Multi-purpose connector, primary or quick opening, used as a component, which can be loaded along its major axis or minor axis.
Class Q: Quick opening connector used in long-term or permanent applications, screw lock. When completely screwed this part is a supporting part of the
connector.
Class T: Manufactured end connector, automatic lock, designed as part of a subsystem for attachment so that the load is carried in a predetermined direction.

Connection elements or equipment component. A lanyard can be in rope made of synthetic fibres, in metallic rope, in strap or in chain.
CAUTION: A lanyard without energy absorber must not be used as a fall arrest equipment.

A work positioning system consists of elements (belt and work positioning line), joined together to form a complete piece of equipment.

Element of a fall arrester system to which a personal protective equipment can be fastened.
Type A - NON PPE : Anchor device with one or more stationary anchor points with the need of a structural anchor.
Type B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
Type C - NON PPE : Anchor device employing a flexible anchor line with maximum deviation of 15°.
Type D - NON PPE : Anchor device employing a rigid anchor line with maximum deviation of 15°.
Type E: Anchor device for use on surfaces with a maximum slope of 5°.

Some of our products are accredited under the regulations of many countries.

The products concerned and / or bear the following markings:

USA
Argentina
Brasil	CA
China	UK standards
Canada
Ukraine
Common Economic Space (Russia, Belarus, Kazakhstan)
United Kingdom
Mexico

Taking into account the level of risk covered, the Regulation defines the PPE categories and determines the various manufacturer’s obligations:
• PPE category 1: Protection against minor risks.
• PPE category 2: All PPE that are not category 1 or 3.
• PPE category 3: Protection against disability or fatality

Inclui ensaios de laboratório destinados a garantir a conformidade da resistência aos choques, à temperatura, à humidade, aos ambientes corrosivos e da resistência mecânica e respiratória.

Inclui ensaios relativos à resistência, à temperatura, aos choques, à chama, à radiação térmica, à tração, aos produtos de limpeza e de desinfeção. Além disso, a inspeção visual deve ser sobre a marcação e o manual de informação do fabricante.

89/391: Identifi car e avaliar o risco, tomar as medidas preventivas e de proteção, informar e formar os trabalhadores.

2004/37: Riscos ligados à exposição a agentes cancerígenos ou mutagénicos no trabalho: identifi cação dos perigos, «valores limite», proteção respiratória.

89/656: Seleccionar e usar o EPI apropriado e certifi cado, informar e formar os usuários, verifi car e substituir o EPI se necessário.

Diz respeito aos ensaios de resistência aos choques, aos produtos de limpeza e de desinfeção, à temperatura, à chama e aos ensaios de resistência respiratória.

Define o sistema de conexão standard dos filtros para máscaras completas.

Especifica os ensaios em matéria de resistência às manipulações, ao desgaste, aos choques, à chama e à resistência respiratória.