Equipment consisting of a mobile fall arrester with self-locking, integral with its flexible anchorage line (rope, cable…). An energy reducer (absorber) can be built-in in the equipment.

Equipment consisting of a mobile fall arrester with self-locking, integral with its rigid anchorage line (rail, cable…). An energy reducer can be built-in on the equipment.

Body securing device intended to stop falls. The full body harness can be made of straps, buckles and other elements; set and adjusted in a right way on the body of an individual to secure him during a fall and afterwards.

Component of a fall arrest equipment, which guarantees the stop of a fall from a height in safety by reducing the impact of the shock.

WARNING: If we associate a lanyard energy absorber, the total length of the entire device must not exceed 2 m.

Fall arrester with self-locking device and a self-retractable system for the lanyard. An energy reducer (absorber) can be built-in in the equipment.

Beschrijft de artikelen en de situaties voor individuele bescherming tegen valrisico’s.

REACH and PPE statement document  ​ 

SCIP information

Connection element or equipment component. A connector can be karabiner or a snap hook.
Class A: Anchorage connector, automatic lock used as the component and designed to be connected directly to a specific type of anchorage.
Class B: Primary connector with automatic lock used as the component.
Class M: Multi-purpose connector, primary or quick opening, used as a component, which can be loaded along its major axis or minor axis.
Class Q: Quick opening connector used in long-term or permanent applications, screw lock. When completely screwed this part is a supporting part of the
connector.
Class T: Manufactured end connector, automatic lock, designed as part of a subsystem for attachment so that the load is carried in a predetermined direction.

Connection elements or equipment component. A lanyard can be in rope made of synthetic fibres, in metallic rope, in strap or in chain.
CAUTION: A lanyard without energy absorber must not be used as a fall arrest equipment.

A work positioning system consists of elements (belt and work positioning line), joined together to form a complete piece of equipment.

Element of a fall arrester system to which a personal protective equipment can be fastened.
Type A - NON PPE : Anchor device with one or more stationary anchor points with the need of a structural anchor.
Type B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
Type C - NON PPE : Anchor device employing a flexible anchor line with maximum deviation of 15°.
Type D - NON PPE : Anchor device employing a rigid anchor line with maximum deviation of 15°.
Type E: Anchor device for use on surfaces with a maximum slope of 5°.

Alguns dos nossos productos estão homologados sob as regulações de vários países.
Os productos relacionados (e/ou a sua mbalagem) levam a seguinte marcação:

USA
Argentina
Brasil	CA
China	UK standards
Canada
Ukraine
Common Economic Space (Russia, Belarus, Kazakhstan)
United Kingdom
Mexico

Conforme o nível de risco considerado o Regulamento define as categorias de EPI e as diferentes obrigações respectivas para o fabricante:
• EPI de categoria 1: Protecção contra os riscos menores.
• EPI de categoria 2: Todos os EPI que não são da categoria 1 ou 3.
• EPI de categoria 3: Protecção contra os riscos de invalidez ou de morte.

Inclui ensaios de laboratório destinados a garantir a conformidade da resistência aos choques, à temperatura, à humidade, aos ambientes corrosivos e da resistência mecânica e respiratória.

Inclui ensaios relativos à resistência, à temperatura, aos choques, à chama, à radiação térmica, à tração, aos produtos de limpeza e de desinfeção. Além disso, a inspeção visual deve ser sobre a marcação e o manual de informação do fabricante.

89/391: Identifi car e avaliar o risco, tomar as medidas preventivas e de proteção, informar e formar os trabalhadores.

2004/37: Riscos ligados à exposição a agentes cancerígenos ou mutagénicos no trabalho: identifi cação dos perigos, «valores limite», proteção respiratória.

89/656: Seleccionar e usar o EPI apropriado e certifi cado, informar e formar os usuários, verifi car e substituir o EPI se necessário.

Diz respeito aos ensaios de resistência aos choques, aos produtos de limpeza e de desinfeção, à temperatura, à chama e aos ensaios de resistência respiratória.

Define o sistema de conexão standard dos filtros para máscaras completas.

Especifica os ensaios em matéria de resistência às manipulações, ao desgaste, aos choques, à chama e à resistência respiratória.